MICROCEMENT 6820 WHITE 3KG

Coarse-looking fine-grained. Microcement decor, ready for decoration on the wall. Provides decorative walls with a mottled surface.

Applicable Zones

Decorative microcement for wall surfaces. DO NOT use 6820 micro decor in a wet area.

Base Type

Wall surface decorative microcement 6820 micro decor can be applied in a 1-2 mm thick layer. on masonry base, painted surfaces, construction boards, gypsum plaster, tiles, on surfaces consisting of plasterboard and concrete.

Preparing the base

Substrates must be firm, dry, jame negali būti szukku, tepalų, fat ar laisvų dalelyčių. Before laying the putty, the ends of the base should be sanded.

Priming

Prinuomaja kai pagrindas yra parengiamas ir yra dry. Such sugeriantys for the base like concrete, lightweight concrete, plaster or tiles, are primed with water diluted with mira 4170 decor primer in the ratio of 1 part primer to 3 parts water. Not such absorbent bases - in the ratio of 1 part soil to 2 parts water. Thick nails, for example painted nails, ceramic tiles etc., must be cleaned and polished. Median base panels are primed with concentrated 4170 decor primer.

Application

3 kg 6820 micro decor sumaishomas su 0.8-0.9 l pure water is 2-3 min. mix slowly with a mixer until a homogeneous mass is formed. Apply the product flat trowel with a similar tool to the unprimed surface. Pritaikymas: for 1-2 cards, the surface is flexible, smoothing effects and structure are achieved. If you need to apply more layers, keep the surface of the first layer dry for at least 3 hours.

NOTE: The application of 6820 micro decor should be continued until the entire plane is completely covered to avoid color differences. The surface may change color depending on weather conditions and drying temperature. Application can be interrupted only at the corners of the surface, at the masonry groove or similar.

Clean tools with water immediately after use.