Produkta informācija
| Color | Balta krās. |
|---|---|
| For finishing works | Āra |
| Package quantity, kg | 25 |
| Drying time (before touch) | 60 min |
| Can be tinted | Jā |
| Brand | Sakret |
| Collection | MRP-E |
| Consumption | 6, 2 m2 |
| Faction | 3 mm |
| Compulsory guarantee | 24 mēn |
| Svītrkods | 500516326 |
MRP-E / Mineral Decorative Plaster (Rain Effect)
- For creating decorative surfaces on the insulation system's reinforced plaster and other mineral bases.
- For indoor and outdoor work.
- Water vapor permeable.
- In white color. Other colors can be obtained using SAKRET mineral pigments or by tinting with SAKRET KS, SAKRET FM, SAKRET SKF (SILICON) paint.
- Not suitable for plinth plastering!
Usage
- The base must be fully hardened, dry, level, and clean, free from cracks. Unstable, flaking surface parts, as well as dust, dirt, grease, paint residues, and other impurities that reduce adhesion to the base must be removed.
- The base must be primed with SAKRET PG primer.
- Pour the dry mix into a clean container with clean, cool water and mix until a homogeneous mass without lumps is formed. To avoid color differences, it is essential to accurately dose the water and mix the entire contents of the bag! After 5 minutes of maturation, mix again.
- Apply the prepared mortar to the surface with a metal trowel or spatula in a layer equal to the largest grain size. Create the decorative surface with horizontal or vertical movements, using a plastic trowel.
- Protect the uncured surface from atmospheric precipitation, direct sunlight, and frost.
Additional Instructions
- In all cases, first follow the information provided on the material packaging or in the accompanying documents!
- All safe transportation, storage, and working regulations must be observed! The dry mix contains cement and lime; an alkaline reaction occurs with water. Eye and skin protection is mandatory!
- Store materials only in sealed original packaging.
- Do not dispose of materials in soil, water bodies, or sewers.
- Do not dilute the mixed mortar with water after it has started to set. Protect the uncured mortar from direct sunlight, drafts, and high temperatures (above +25°C).
- Wash containers and tools immediately after use. Hardened mortar can only be removed mechanically.
- Dispose of empty packaging according to local waste management regulations.
- In case of uncertainty, contact the seller or SAKRET specialists.
Technical Data
- Consumption: ~ 3.0 kg/m2 with 2 mm grains / ~ 4.0 kg/m2 with 3 mm grains.
- Working and base temperature: from +5°C to +25°C.
| Mortar Usage Time | Storage Duration |
|---|---|
| 60 min. | 12 months. |
Atsauksmes
Pagaidām nav atsauksmju. Esi pirmais!
Vairāk no Sakret
Uzrakstīt atsauksmi
Rakstīt atsauksmi par: DECORATIVE PLASTER SAKRET MRP-E 3MM 25KG
