UNDERCOVER BRIKO 2MM 1.2 X 12.5 M (15M2)
Product information
| Manufacturer | BRIKO [EN] |
|---|---|
| Material | Putu polietilēns |
| Length | 1250 cm |
| Width | 120 cm |
| Thickness | 0.2 cm |
| Product type | Apakšpaklāji |
| Brand | Briko |
| Model | 2MM, 15M2 |
| With aluminum foil | Nē |
| Thermal conductivity coefficient, W/(mk) | 0.04 |
| Material density, kg/m³ | 30 |
| Adhesive | Nē |
| Compressive strength, kPA | 20 |
| Quantity per package, m2 | 15 |
| Purpose | Iekšdarbiem, lamināta grīdas segumam un parketam, piemērots apsildāmām grīdām. |
| Barcode | 502703498 |
The pavement must be thick, flexible and have the ability to adapt to fill minor surface irregularities. There should not be voids in it that strengthen the "drum sound" effect in the room. Density — 30 kg/m³. The base is heat permeable, suitable for heated floors. Heat conduction coefficient — 0.041 W/mK. The floor covering should reduce noise as best as possible - impact sound insulation index ≥17 dB. Compression Recovery - 30%. Very resistant to pressure, durable, retains properties for more than 50 years.
INSTRUCTIONS FOR USE
Underlayment is used as an insulating layer between a concrete or wooden floor and a laminate floor. The surface to be covered must be dry and clean (no nails, plaster, putty or other residues). Before laying the covering, it is recommended to lay a polyethylene film on the concrete or wooden surface and lay the floor covering on it. The polyethylene film reduces the friction between the concrete or wooden surface and the floor covering - thus extending its service life.
The floor covering must be unrolled and laid directly on the floor. It is recommended to leave a gap of 10-15 mm to the wall, connect the seams with adhesive tape. A laminate floor covering is installed on the floor covering.
Reviews
There are no reviews yet. Be the first!
Write a review
Write a review for: UNDERCOVER BRIKO 2MM 1.2 X 12.5 M (15M2)
